Honor 70 Series 3C Certified
In today’s morning Honor 70 Series model FNE-AN00 new machine has been entered into the network Ministry of Industry and 3C, equipped with 6.67-inch 1080P OLED screen, rated 4800mAh battery, thickness of 7.91mm, support 66W fast charging, size 161.4×73.3×7.91mm.
From the 3C certification information, the machine will come standard with an HW-110600C00 charger, supporting up to 11VDC x 6A (66W) fast charging specifications, and will be produced by Changsha BYD and Honor’s factory.
In addition, Honor recently had some other products through the 3C certification, such as the maximum 100W power HN-200500C03 charger, which not surprisingly is the Honor 70 Pro+ charger model.
The Honor 70 Series will be launched in three versions: Standard, Pro, and Pro+. The standard Honor 70 is equipped with a Snapdragon 7 Gen1 processor, an FHD+ screen from BOE on the front, a 10bit color depth, and support for a 120Hz refresh rate. The rear 108MP pixel main camera with 8MP + 2MP triple camera-lens combination, 4800 mAh battery capacity, and support for 66W fast charging.
The Honor 70 Pro has a processor of Dimensity 8100, a front screen supplier also from BOE, support for 1Hz-120Hz LTPO adaptive refresh rate technology, a rear 50MP IMX766 + 50MP super wide-angle dual main camera, and an 8MP secondary camera with OIS optical stabilization support. Battery capacity and fast charging specifications are the same as the standard version.
The top-of-the-line Pro+ version is equipped with MediaTek Dimensity 9000 processor, the same screen specifications as the Pro version, and an upgraded 12MP secondary lens in addition to the 50MP IMX766 + 50MP ultra wide-angle dual primary camera. The battery capacity is 4600mAh and supports 100W fast charging.
Devices are expected to be released around the end of this month. Two of the three new models will be OEM produced by BYD Electronics, and the other one will be produced by Honor itself.